

- #Instock pulse oximeter how to
- #Instock pulse oximeter skin
- #Instock pulse oximeter portable
- #Instock pulse oximeter plus
#Instock pulse oximeter how to
How To Disinfect the Proactive Pulse Oximeter? Let the Proactive pulse oximeter dry for some time away from direct sunlight.Remove the excess water with a clean dry cloth.First, clean the device with cotton and moisten a piece of cloth with water and wipe down the device.Turn off the device and remove the batteries.How To Clean the Proactive Pulse Oximeter? The Proactive pulse oximeter works best when placed in an area with a temperature between -20o and 60oC and relative humidity less than 95%. The device must be stored in a dry environment with good ventilation. Keep away from wet areas as well as any environment with corrosive gasses. Replace batteries when indicated by the battery voltage indicator. Keep the Proactive pulse oximeter clean and remove the battery before storing it.
#Instock pulse oximeter skin
The probe in a pulse oximeter emits a red light and an infrared light on the skin for about 30 times in a second. Use cotton or a soft cloth with the disinfectant and apply it to the finger bed. Recommended disinfectants include ethanol 70% and isopropanol 70%. To maintain the Proactive Pulse oximeter, be sure to clean & disinfect after every use. Turns off automatically to save batteryįAQ's How To Maintain the Proactive Pulse Oximeter?Įnsure that the batteries are removed from the device prior to cleaning.An important tool for nursing homes, community medical treatment, hospital, sports centers and home care, etc.Uses advanced technology for monitoring SpO2 and heart rate, displays in a bar graph.

#Instock pulse oximeter portable
Easily portable due to its lightweight and small size.Easy to use: operable with a single button.A lanyard is included with the device for easy portability. Do not test continuously for longer than 5 minutes on the same finger. To receive the most accurate readings, use the oximeter on the index, middle, or ring fingers. To wake the device from sleep mode, simply press the power button. The device runs on two AAA batteries (included) and automatically enters sleep mode after 8 seconds if no signal is detected. The display also shows users how much battery life is remaining, including a low power indication (the battery symbol with an “x” through it).

The Proactive Pulse Oximeter features an LED display for both SpO2 and pulse rate. This non-invasive fingertip device uses infrared light to monitor blood levels and provide instant, real-time feedback. The Proactive Pulse Oximeter is designed to be accurate within a 2% range of blood saturation and within a 2 bpm range of pulse rate. Therefore, patients need a device that is going to provide an accurate reading every time.
#Instock pulse oximeter plus

